Tag Archives: ECW

Half-Timber Barn, Finally Finished!

Way back in June of 2011, I started a fairly small half-timber barn for 28mm, for either my ECW/TYW stuff or early 20th C pulp gaming.

I’d gotten most of the painting done on the building six years ago, then moved on to other projects as the 16th C ECW/TYW gaming failed to grab my attention. The barn has floated around the edges of my painting bench, almost but not quite finished, ever since.

Earlier this week I was off sick and needed something sedentary and easy to do, so I pulled the barn out and started adding doors, some final paint touchups, and flocking and terrain around the outside of the walls. I’d originally planned, long ago, to do hinged arched doors on the big front doorway of the barn, but decided that six years of not figuring out how to do that in a wargamer-proof way was long enough and have gone with simple closed doors across the back of the arch!

Here’s what it looked like back in June 2011:

barn01
A stone-and-halftimber barn, work in progress. Click, as usual, for larger.

Here, all finished and detailed, is the barn in April 2017!

The big front door is wooden coffee stir stick planks over an offcut of picture framing card (matt board), cut to size, and then roughed up with sandpaper, an Xacto knife, and a razor saw. The back door is just card, with planks scored into it with the back of an Xacto knife. The hinges on both are scraps of light card painted with Tarnished Steel. Both doors got all-over washes with several different colours of wash, including green on the front door to stain the wood.

The roof is towel thatch (this was the first thatch building I’d ever done!) with thin foam for the stonework on the bottom half of the walls. The greenery is a mix from all over, including the nice red flowers from Rain City Hobbies over in Vancouver.

For more details on building the barn, check the two 2011 articles I linked to right up in the first paragraph of this post, there’s lots of detail there.

Nice to finally get this building done and dusted after nearly six years of three-quarters finished limbo! Now I need to consider other buildings for an English Civil War or Thirty Years War hamlet… some cottages, maybe a version of the interesting dove cote seen in the ECW edition of WS&S I picked up at Trumpeter Salute. We shall see!

Half-Timber Barn WiP Part II: Thatched Roof

Picked up a cheap towel to use as thatching. Here it is in a quickie late-night photograph, glue still wet on the roof of the half-timber barn.

thatchroofwip
Towel strips as thatch on the half-timber barn. As usual, click for full size.


The roof has a base of sheet styrene. I used white glue to stick the towel strips down, then more thinned white glue to soak the towel, which (when it eventually dries!) should solidify it nicely.

The barn has also been given a base of mattboard and mostly primed. My usual scenery primer is a 1:1 mix of white glue and black paint, mixed right on the model. It seals and protects the scenery surface nicely, even fairly fragile stuff like styrofoam toughens up a bit!

The main arched doors are also in progress, but I forgot to get a photo of them.

Still to-do for the roof, trim the edges and glue them under the eves for a more finished look, then paint and more paint. I also need to do basswood rafters under the roof, both for looks and for actual structural support, as the roof will still be removable when this building is finished.

The roof still looks a bit too towel-like right now, hopefully finishing the edges and painting will sort that!

Half-Timber Barn WiP

Something for the English Civil War/Thirty Years War table, as well as for pulp games set in the quainter parts of the UK or Europe! All those crops gathered from my fields have to be stored somewhere, after all.

barn01
A stone-and-halftimber barn, work in progress. Click, as usual, for larger.

The whole thing is highly inspired by Warlord Game’s rather nice 16th Century Barn. Actually, scrub “highly inspired”, I’m outright copying the building, as a learning piece! Imitation is the sincerest form of flattery, isn’t it?

The basic structure is foamcore. The stonework is soft foam salvaged from a takeout food container; I’m going to have to swing by our local (awesome) plastic supplier to see if they have something similar in sheets, as one takeout container at a time is a rather slow way to accumulate building materials! I scribed/carved the stones with a sharp pencil, and quite like how they’ve turned out.

The timbering is 1/8th x 1/16th inch balsa strip from the Stockpile’o’Doom. I have about six lengths of it, and it is entirely possible it’s leftovers from our family model railroading setup in the early/mid-1990s when I was in junior high. I think I’ve carried that balsa around long enough — time to put it to use, right?

Doors, additional timbering at the corners of the building, and a base are still to do. The inside will get a bit of plastering just for texture, and probably a lot of straw strewn around and such — details to add interest without getting much in the way, ideally.

The roof will be towel thatching over a styrene base.

I’ve heard the suggestion that you try one new-to-you technique per project; I’m afraid this simple-looking building breaks that “rule” good and proper! Foam stonework is new to me; likewise half-timbered building construction, and I’ve never actually used the towel-as-thatch technique before either! Wish me luck!

Photos from My First Thirty Years War Fight

Sunday the 29th of May we got together to do a four-player 1,000pt Field of Glory: Renaissance battle; this was bigger than had previously been attempted and was my first actual game in this period.

I badly bent a rule I’ve held to for more than a decade, and fielded unfinished figures (a lot of them, in fact!) to get a force on the table. I had an allied German army of two units of standard pike-and-shot foot, a field commander, and an oversized technically-illegal unit of really good-quality horse (six bases instead of the usual four, all Superior Determined Horse, for the other FoG:R players out there), the rest of our side (centre and other wing) was all German Catholic. Opposing us was a French force, with one wing of allied English New Model Army. An a-historical mashup, to be sure, but a good game. The two allied wings wound up facing each other, my German Prods vs the New Model Army, while the two larger armies fought the other wing and the centre.

Photos, a bit more narrative and some thoughts after the jump!
Continue reading Photos from My First Thirty Years War Fight

ECW Painting, Other Randomness for 28 May 2011

An entire week since my last substantial post! The horror, how will our dedicated readership cope?

I’ve been painting up an English Civil War/Thirty Years War storm this week, filling that inevitable post-Lead Painters League void with 40-odd plastic pike-and-shotte foot and a dozen horse. You all saw 5 of the horse in one of my LPL entries, of course, the rest are taking shape nicely and all of the foot now have most of their basic paint on them. Sunday the 29th we’re running a 1000pt Field of Glory: Renaissance big battle, and I’m breaking one of my long-standing rules by fielding figures that aren’t even anywhere near finished just to get something on the table. At least they’re not straight-up Primered Legions — there are depths to which I will not stoop.

No pictures of my WiP paintjobs, but I’ll take the camera to tomorrow’s big game and try to get some reasonable shots to share here.

The Lead Adventure Forum is, of course, one of the greatest collections of creative wargaming minds I’m aware of. A random sampling of current coolness there that should be more widely known: Chicken Race on the Arumbaya, in which the estimable Hammers plans a pulpish steamboat race with a South American feel and some great-looking boats. Also, Boggler’s converted Improvised Back-of-Beyond Armoured Truck, very nice conversions of diecast toy trucks.

Elsewhere on the web (elseweb?) An Evil Giraffe has done his own versions of my riverbank pieces, and very nice they are too. He used broken cork sheet for his banks, so it has more texture (but also more height) than mine.

Finally, also via LAF but worthy of being mentioned on it’s own, Sarissa Precision have started selling a very, very nice looking line of 28mm laser-cut and -etched urban buildings that are perfect for pulp! Information here on the Sarissa site, and on sale here in their online store. I can’t wait to have some spare money to throw Sarissa’s way, the buildings are a good size (6″x4″ or 8″x6″ footprints and stackable for extra floors) and a fair price with enough detail to be interesting but not too fussy that they’re impractical. Hopefully at some point they offer their windows, doors and other details seperately, or even just the building fronts for those of us comfortable cutting our own side and rear walls.

Photos tomorrow or Monday of the ECW/TYW big-game madness, I promise!

LPL5 Week 9: The Horse Again, I’m Afraid

Week 9? There was no Week 9. Well, OK, there was, but it involved me running my ECW Parliamentarian Horse again, and them getting beaten. Again.

However, I still like the models and the paintjob I managed on them, so here they are again for everyone to admire:

lpl5r8
For God And Parliament! 28mm English Civil War horse charge down a country lane. As always, click for full size.

In better news, LPL5’s final, ultimate round, Round 10, with the bonus theme of “A Scene from the Movies” is running right now. All sorts of great stuff, including a bonus-worthy set of miniatures from me that I really like, and that other people do too, judging by the voting!

LPL5 Week 8: For God And Parliament!

For the 5th Lead Painters League’s 8th Round, something entirely new from me: 28mm English Civil War/Thirty Years War cavalry!

These are Warlord plastic horse, nominally ECW Parliamentarian horse but really destined for our gaming group’s quasi-historical nominally-Thirty Years War games. They’re also the first 28mm cavalry I’ve ever done, the first plastic wargaming figures I’ve ever done, and the first non-20th C historicals I’ve ever done. All at once!

lpl5r8
For God And Parliament! 28mm English Civil War horse charge down a country lane. As always, click for full size.

Unfortunately they got beaten soundly by a nicely presented and very characterful set of 28mm Middle Eastern figures.

Still, I’m pleased with how the paintjobs turned out. I’d be remiss if I didn’t credit this Games Workshop article on painting horses with making the horse painting and the resulting horses both more interesting! (I’ve just said something nice about GW, in public… this might just be a sign of the End Times…)

(I also just noticed that this is post number 100 on The Warbard! Now, that includes a lot of old website material brought over as posts, but it’s still been a busy 4-and-a-bit months here! Many more to come! — Brian)