baggage

28mm Pulp Baggage Review

Phil of Slug Industries (and Adventures in Wargaming, his personal blog) has recently released a set of 28mm pulp luggage. Cast in resin, you get six steamer trunks, four suitcases and three hatboxes, a nice selection to dress up any pulpish scene, provide objectives for your skulking players to try to locate, or just provide cover on a dock or train station platform!

This plethora of options is especially broad when you decide, as I did, to order three full sets of this luggage! Counting the three miscasts Phil threw into my order, I now have 42 individual pieces of baggage. Douglas Adams would have approved of this number, and so do I.

baggage
Thirteen pieces of baggage from 6mmPhil/Slug Industries. Scale provided by a Copplestone Bolshevik on the left and a Pulp Figures US Navy sailor on the right. The grid on the cutting mat is half-inch. Click for larger.

The baggage pieces are all cleanly cast in a light grey resin, and I didn’t see a single air bubble or miscast on my sets. The largest of the steamer trunks is just over waist high on a 28mm figure; the smallest hat box just slightly bigger than a typical 28mm figure’s head. Most of the flash rubbed off with my thumbnail; a couple of the smaller pieces had a bit of more solid flash around the bottom edge that needed a moment’s work with knife and sandpaper to deal with. Even two of the three “miscasts” I got with my order are perfectly usable, with just a bubble or two around the handles on the sides marking them as “miscasts” – I’ve paid full price for resin pieces with bigger casting flaws in the past!

The largest of the steamer trunks is 1.5″ long, 7/8″ wide and 3/4″ tall (37mm x 23mm x20mm); the smallest trunk on the far right of the photo above is 5/8″ x 1/2″ x 7/16″ (16mm x 12mm x 12mm).

I’m busy getting ready for the Trumpeter Salute convention in two weeks and contemplating a run at LAF’s Lead Painter’s League 7 which starts just after that, so I can’t promise I’ll have painted examples of this baggage to show off terribly soon, but I will get some of it done after Trumpeter and post pictures here. It should be fun to paint, the details are nice and crisp. Metal steamer trunks can come in a wide variety of colours, and battered, worn leather for most of the suitcases is also easy and fun to paint.

I should add, in closing, that Phil doesn’t currently have the luggage listed on his Slug Industries website, but purchase details can be found at this thread on LAF’s Bazaar forum. Everyone needs more baggage to haul around!

Please Leave a Comment! (Please note that most comments are held for moderation - please be patient!)