Tiny Boats and Even Tinier Planes

When I did my first WW2 coastal order to Last Square back in November 2019, well over six months ago now, I added a pack of British Beaufighter/Beaufort and a pack of German Ju88 for the heck of it, chosen because both types of aircraft show up in the maritime strike role for most of the war with various loadouts.

I got them, looked at them, was dumbstruck by the insanely minute size of the things, and put them aside to paint the boats up instead. Having just finished (most of) the second order of Last Square coastal naval boats and being in a get-stuff-finished mood, I decided to have another look at the tiny tiny planes and figure out how to mount and paint them.

I recalled reading about using plastic broom bristles for masts and antenna previously, so I decided to test this out for creating flying stands suitable for tiny planes. I used the same 40mmx20mm thin acrylic bases I’m using for most of my boats, because I’ve got them, and I happened to have a micro-drill-bit in my tool stash almost perfectly the same size as the bristles I harvested off our household broom.

RAF Bristol Beauforts/Beaufighters, two mounted and one left loose. Click for larger.

I kept the flying heights fairly short, about one inch maximum, which means these planes are all coming in at wavetop height, pretty much, which seems to make sense when attacking small coastal vessels and is way, way easier to store than taller possibly more realistic height stands!

Two Beaufighters and two Ju88 mostly done, including recognizable national insignia on these tiny, tiny planes. Click for larger.
Extreme closeup of the unmounted Beaufighter and Ju88. I’m pleased with the look of the canopies, especially on the German Ju88 with their big “greenhouse” canopies covering most of the front end. Click for larger.

Painting Notes

All my current paints are from the Reaper Master Paints series. All six planes got a white primer, and then for the RAF I used Muddy Brown and Military Green for the topside camo; the underside is Heather Blue mixed with Rainy Grey which seems like a good match for the RAF “sky blue” grey-blue underside paint.

The Germans were a mix of Rainy Grey and Muddy Olive 1:1 for the all-over base coat, with two of the Ju88s getting slightly darker grey-green camo added with some additional Stone Grey added to the Rainy Grey/Muddy Olive mix.

I adding some highlighting along edges mostly by mixing a bit of Rainy Grey into the relevant base colour, and the Germans got some yellow recognition patches with Marigold Yellow. I also used some Games Workshop Nuln Oil (black) and Agrax Earthshade (brown) washes, especially along the roots of the wings.

The German iron crosses are Walnut Brown, a lovely almost-black that I use all the time instead of actual Pure Black.

The RAF roundels are Marigold Yellow, Sapphire Blue, Pure White, and Carnage Red.

Windows and cockpit canopies were picked out with Ghost White, a blue-tinted off-white.

For scale, I made sure to take this photo with my thumb “in the way”. That’s a standard CD I’m using to hold the planes, just for additional scale. These things are seriously tiny. Click for larger.
Side views, RAF Beauforts/Beaufighters on the left and Luftwaffe Ju88 on the right. Click for larger.
Tail end view, Beaufort/Beaufighter left, Ju88 to the right. Click for larger.
Forward view, same arrangement as previous. Click for larger.

Aircraft don’t actually play a huge role in most of the engagements coastal naval vessels find themselves involved in, so I don’t think I’ll be adding to my collection of tiny aircraft anytime particularly soon, but these turned out to be fun to paint and they ended up way better looking than I was thinking they would, given the diminutive size of the things!

New WW2 Tiny Boats

Latest batch of World War Two coastal naval vessels in 1/1200 scale is done and based. As with the previous vessels, these are all Figurehead from Last Square in the States. I’m especially pleased with the two German patrol trawlers (Vorpostenboote) with their dazzle/disruption camo scheme.

First of two Vorpostenboot. Click for larger.
Second Vorpostenboot. The two models are actually different, which is cool when representing these notably heterogeneous craft (almost all requisitioned trawlers pressed into service as escorts) on the table. Click for larger.

I also did up a few more Royal Navy Coastal Command craft, four Fairmile B Motor Launches and four 70′ British Power Boat (BPB) Motor Gun Boats. The BPBs are really tiny at 1/1200 scale, under 20mm long!

Four BPB Motor Gun Boats in the foreground and four Fairmile B Motor Launches in the background, all on 40mm long acrylic bases. Click for larger.

And the reason it’s been quiet here on the blog for the last couple of weeks is that I’ve been completely pulling my hobby/painting area apart and have finally mostly put it together again, all with the aim of installing a big Ikea shelving unit in one corner, a Kallax 57′ x 57′ monster.

The partially-rebuilt painting/hobby/game storage area! Click, as always, for larger.

The cubicles of the Kallax will fit a banker’s box (there’s a couple in there already) which is already my standard method of storing and transporting scenery. I’m still planning a massive sort of my scenery stockpile, which will (to be honest) probably take another couple of months in bits and pieces. There’s stuff in the stash that hasn’t hit the table in years and year because it’s buried under other things or just straight up been misplaced and I don’t actually know where it is!

Links of Interest, 1 July 2020

For this Canada Day in a time of pestilence abroad in the land, the usual mix of individual links and items that don’t quite warrant an entire freestanding post, as is an irregular feature of this blog.

Curt of the always-awsome Analogue Hobbies blog has been doing 2mm Napoleonics at a really high standard, including gorgeously painted tiny renditions of the various buildings made famous by the Battle of Waterloo. He’s previously posted about his 2mm Nap armies, as well.

I am getting more and more tempted to do either Russian Civil War or 17th C English Civil War in 2mm… to which end I recently bought the Forward March 2mm Library and might need to get some things 3d printed for me. I quite like the thought of a single print bed of bases being an entire army, and I’ve always liked the “miles of battlefield all at once” look of small scale gaming even though I’ve done nothing smaller than 15mm (and far more 28mm than anything else) for many years now.

Rather nice little tutorial on doing bog or fen areas easily with patterned clear plastic sheet over on Lead Legionaries. This is a terrain type I’ve been meaning to do for several years now but it’s still somewhere on the endless to-do list.

On the WW2 naval gaming side, which I want to get back to sometime soon, I recently discovered the nicely laid out german-navy.de which has good short articles and illustrations of nearly everything the WW2 Kreigsmarine built or planned to build, from the workaday utility boats like the well known R-boote to the insane jet-powered hydrofoil they were dreaming of far too late in the war to actually matter. (German military designers spent the entire war hopped up on the Very Best Drugs, you can’t convince me that isn’t true!) If you have found a similar resource for other WW2 navies (especially the Royal Navy) I’d love to know about it.

Happy Canada Day if you happen to be Canadian, Happy (upcoming) Independence Day if you’re American, and hope July is good to you regardless of where you’re reading this from!