I first heard of Impudent Mortal when Richard of TooFatLardies used two of their buildings to build himself a very nice brewery for WW2 gaming. Rich got his through Minibits in the UK but it turns out Impudent Mortal is over on this side of “the Pond” down in the States.
I was interested in the universal brick look of the industrial buildings, which are the sort of Victorian/early-20th C brickwork you can find almost anywhere in the world right up to the present day, so I finally ordered a pair of brick buildings, a 6″x4″ rectangular building and a larger L-shaped building.
I also ordered one of their paint racks, the 66-bottle 3-level Reverse Eyedropper Paint Rack Extra Shelf, as most of my paint collection is Reaper Master Series in the very nice dropper bottles.
Communication from Walt at Impudent Mortal is fantastically quick and shipping is similar; everything arrived while I was away in northern Alberta then had to wait until I got back to the real world before I could do anything with it! Both buildings and the paint rack arrived tightly wrapped in heavy cling-wrap, the industrial version of your standard sandwich wrap, which kept all the components together very nicely inside the box.
I’ll get the buildings covered properly when I assemble them soon, but my first impression from dry-fitting the smaller building and then properly assembling the paint rack is that everything fits together easily and solidly. All the Impudent Mortal stuff is laser-cut from 3mm MDF, which will make for very solid buildings and a very solid paint rack.
Instead of shipping their stuff with instruction sheets IM has both videos and PDFs on their website, which has the advantage of giving you an idea of how everything fits together even before you buy it. The paint rack I bought is 14 pieces: two vertical sides, six shelf pieces, and the rest bracing at the backs of the shelves. Each shelf level has two pieces, the top piece with larger holes to hold the body of the dropper bottle, and the lower piece with smaller holes intended to hold the top of the lid of each dropper bottle.
Each level also has half a dozen smaller holes in each back corner, intended to hold brushes, sculpting tools, pencils or other small tools. That’s a useful way to use up the corners too small to tuck one more bottle into, but the lower pieces have holes in them too, which is odd – it means only the lowest shelf can actually be used to hold most things, because a brush or pencil put in one of the top shelf’s holes will just fall through. Leaving those corners of the lower pieces of each shelf pair solid would make them more usable.
Assembly was easy and quick and the fit was good. Lay one vertical side piece out, add all six shelf pieces with a bit of white glue, then drop the other side piece in and click everything together one shelf piece at a time. The various braces go on and keep everything square, and you’re done. Maybe ten minutes after I started I had the paint rack on my crowded painting bench and was loading paint into it!
Making space for the new rack forced a badly-needed reorganization of my fairly small and very crowded painting bench. The small holes for paint brushes and tools will allow me to downsize the round white tin on the left to some sort of smaller container soon, now that files, pencils and such are tucked into the new rack, and the space-consuming clutter of overflow paint bottles from the homemade rack on the left is now nicely contained in the new rack. The shelves on this particular rack are far enough apart that you can fit GW or Tamiya paint pots between the top and bottom pairs of each shelf level, which is a nice bonus. You even have space to do that with a few pots per level when all the holes have dropper bottles in them – see the right-hand side of the middle shelf in the photo above!
The top shelf of the new rack will eventually hold my collection of acrylic artists inks that I use regularly on figures, but give the weight of those bottles I have had to leave them off until the glue had properly dried on the rack!
The IM racks are available in several different styles to fit different types of bottles; this one is about 12″ wide, 8″ deep and just under 12″ tall. Highly recommended and good value for money.
Hope everyone is having an excellent Canadian Thanksgiving long weekend, if you’re lucky enough to be a Canuck, or a good ordinary weekend if not!