Tag Archives: decals

Historicals, Links, Painting, Reviews, WW2 Naval

Decals for 1/1200 Miniatures

Leave a comment

Way back at the very end of 2020 I contacted Misc Minis about decals suitable for 1/1200 ship and aircraft miniatures. After a couple of rounds of email, Kevin sent me a PDF proof sheet with a mix of 1mm and 1.5mm insignia for the Luftwaffe, RAF, and USAAF, as well as some hull numbers as used by the Royal Navy. He’d started with the smallest size of decals for his standard 1/600 ranges, done some tests, and figured out what would work (and what wouldn’t!) when taken down that tiny.

I mentioned the decals in passing in an April 2021 post here, then tucked them away in the dreaded ‘safe place’ and did absolutely nothing with them until this Easter long weekend, two full years later!

With the various Luftwaffe aircraft seen on my last Workbench post based and painted, I sat down with the tiny 4″x2.5″ decal sheet, carefully cut out even tinier individual crosses, and began putting them on the wings of the Me110 heavy fighters and Ju88 Stuka divebombers.

The full decal sheet, with finished Stukas behind and Me109s still waiting for their turn. Click for larger.

The bulk of the Luftwaffe crosses on the sheet are the black outline/white fill style; there’s also a row of pure white crosses as used (I think?) primarily on night fighters. The lower left has no fewer than six different RAF roundel variants, upper right has a bunch of US Army Air Force winged star roundels, and the lower right has RN hull numbers in both white and black. There aren’t any pure black outline Luftwaffe crosses, but honestly I’m OK with that as the black/white ones stand out a bit better and help ID these tiny, tiny airplanes more clearly!

The best closeup I could manage with my cell phone camera. That’s a Stuka with one wing done and the other waiting to be done. Keep in mind that wingtip to wingtip, that entire airplane is about 12mm across! Click for larger.

The Misc Mini decal sheet is full-film so each roundel needs to be cut fairly close to the printed outline. I worked with fine-tip tweezers, a sewing pin, and MicroSet decal solution to get each cross in place. They’ll get MicroSol decal conforming solution next and then matt spray varnish to seal everything in place.

Two Me110 heavy fighters with their roundels in place. Not sure if I’m going to bother doing the insignia on the sides of the fuslage or not – I might just do them with a fine-tip paintbrush as on the Ju88s I painted a couple of years ago for this project. Click for larger.

If you’re in need of tiny decals for tiny aircraft, drop Kevin at Misc Minis a note and ask! This little sheet was thoroughly reasonable for a custom one-off print run (under $10 including shipping) and will last a good long time at the rate I’m using it up. Misc is an American outfit but regular envelope mail for decal sheets is still cheap over the border to Canada at this point!