Tag Archives: RCW

Onion Domes, Part One

Finally made it up to the local branch of Micheal’s craft store after work Wednesday to hunt down material for the two domes of the Russian church. I had planned on using 1″ wooden spheres, but the shelves of random wooden shapes were fairly well picked over and they had no wooden spheres of that size at all.

They did have 1″ wide turned wooden shapes advertised as “decorative rod ends”, though, and I realized they’d make much more interesting onion domes than the simple spheres I’d been planning on.

When I got them home I drilled holes in the top and inserted lengths of wire. One useful thing about turned wood shapes, it’s usually fairly easy to find the centre point, as the lathe tools always leave small ring impressions on the wood. The wire got superglued in, then I used a twist of tinfoil to form the core of the uppermost section of the onion shape. Terracotta Milliput is cheap, sure, but tinfoil is even cheaper!

After that I mixed a small batch of terracotta Milliput and worked it around the wire and foil. I used a 1″ circle I’d cut out of styrene as a rough guide to keep the upward concave curve consistent, and smoothed things down with a wet fingertip. I didn’t fuss with the surface finishing much, a bit of wet sanding after the milliput is dry and another thin layer of putty will finish everything off nicely in due course.

So, behold the domes of the Church of St. Boris the Intoxicated, with the putty still setting on them!

ruschurch_domes1
The onion domes take shape. Click for slightly larger, see text for details!

Aside from the domes, the roofs are finished structurally, all shingles and trim in place. I still have to finish the trim around the door and windows, then it’s off to painting.

Small Russian Church WiP

A quick pair of photos of the small Russian church I’m building for Russian Civil War gaming in 28mm. Earlier in January I discussed some planning and thoughts I had for a wargame-scale small church, and while it isn’t going as fast as I had hoped progress is being made!

ruschurchwip
My work-in-progress Russian church, alongside the two earlier Russian huts.

As with the huts, the basic structure is mattboard with coffee stirsticks providing the woodwork.

ruschurchwip2
A slightly more recent work-in-progress shot. Shingle roofs are slow going…

The roofs of the church are going to be shingled rather than thatched, and while doing shingles with built-up strips looks good, it is frankly tedious… The smaller roof is done except for trim, though, and the main roof is about half done, then it’s on to the domes to provide that very Russian look that’s so distinctive.

Russian Huts Finished

It’s been a bit of a slow ten days or so on the wargaming front around here; I wish I could say there was a proper reason, but I just haven’t spent much time at the workbench. One of those weeks.

Regardless, earlier this month I did finish both small Russian huts/farmhouses that I started over Christmas, and the Russian church is coming along nicely.

Here they are together, with a pair of Brigade Games’ 28mm White Russian officers for scale. The walls are mattboard and wood from coffee stirsticks, the roofs are towel with cardboard structure underneath.

rusbldg_jan12
The fronts of a pair of Russian rural buildings – huts, small barns, possibly small farmhouses.

The smaller one on the left is 3″x2″ and roughly 2″tall, the slightly larger one on the right is 4″x2″and about 3″ tall.

rusroof1
Removable thatch roofs from towel.

The hipped roofs are mattboard and light card underneath with towel soaked in diluted white glue as the thatch.

The roofs removed, showing their structure slightly.

Here you can see the roofs removed and flipped over. The structure of the roofs is all just cardboard and I’ve had no warping at all despite the towel for thatch being fairly liberally soaked in diluted white glue after it’s glued down.

Both buildings got a basecoat of black paint mixed with white glue (my standard scenery basecoat), the woodwork was drybrushed with a grey mixed with some tan followed by a second drybrush of paler grey. The thatch got the same black/white glue base then a couple of drybrushings with various brown/tan/grey mixes. The towel soaks up paint and glue as well as you expect towel to, even during drybrushing — expect to go through paint like crazy.

I have vague plans for a couple more buildings for a Russian hamlet, maybe something in whitewashed plaster more suited to the southern portions of the country, and of course the Russian church is nicely underway. More about that tomorrow!

The Next Building Project

I don’t usually like to talk about plans and ideas before there’s at least some progress to show off, but while I was away over the New Year I had time to do some quick sketching and thinking about a building that would be at the centre of any Russian village or hamlet during the Russian Civil War, and which really is iconic when you want to remind players the game is, in fact, set in Russia.

notebook_jan2011
Some pages from my notebook – possible plans for a feature building for my RCW table!

Google Image Search is really indispensable when looking for prototypes and inspiration, although it’s very easy to get a building that’s just too big for the table. The church at top left would have been over 8″ long and 4 wide, far too big for a scenery piece that is basically just a Line of Sight blocker. The design shrank from there (top right page) then grew slightly on the bottom page and I’m fairly confident the finished result will be something like the two-part double-dome design on those pages, with a footprint roughly 5″x3″ and an overall height somewhere around 6″.

I saved this image from the web but forgot to write down where I found it or any details of the actual building, but it’s become my main reference. I also can’t currently find this picture again via GIS…anyway, it’s a perfect-sized building for my purposes and should help me get a lot of details right.

rus_church
Russian Church found via Google Image Search, except I didn’t save any info on where I found the image… sorry.

Second Russian House WiP

Started another Russian farmhouse on Boxing Day evening, this one slightly bigger than the first at 4″x2″.

I mentioned in the previous article that I used coffee stir sticks for the wood siding. The workbench photo below should explain some of how I’ve been doing these buildings.

rushut2
Two WiP photos of Russian huts. See text for details, click for full size.

Basically, I split stir sticks lengthwise, then glue them along mattboard walls I’ve already cut the doors and windows out of. It’s easier to go back afterward and cut the stir sticks out of the openings than it is to premeasure! You can see one long side already trimmed above, and the other three sides waiting for trimming.

Incidentally, for this kind of trimming, I highly recommend an X-Acto #17 chisel blade instead of the classic scalpel blade (the #11 blade). Being able to cut straight down makes clean cuts in the windows easier, and it’s an easy way to trim thin wood and other strip materials.

The second photo of the pair above shows the new house with the walls assembled but no trim addded yet, and the first hut finished, except for the roof which is drying off-camera.

I’ve already assembled the thatch roof for the new building, and didn’t get any WiP photos of that, but I”ll try to get some progress photos of the next thatch roof I make, I promise. It is kind of difficult to smear glue everywhere and handle a camera, though…

Off for a week tomorrow, so see you all next year!

Night Before the Night Before…

… and over at my place, I was hiding out, enjoying the last evening of solitary, productive peace and quiet I”ll have for a while, as the holiday season proper lands on us tomorrow.

In between beer, sending out festive email, and a little bit of painting on some White Russian troops, I cranked out this:

rcw_hut
A very small hut is investigated by a pair of Brigade Games 28mm Russian officers.

It’s tiny, only 2″ x 3″ – but I’ve always liked the philosophy of making your buildings a bit smaller but having more of them. A hamlet of four or six buildings looks more convincing as a hamlet than a pair of buildings taking up the same space on the wargaming table.

Construction is almost all mattboard, with the siding created from thin wooden coffee stir sticks split lengthwise. The roof is towel over a mattboard framework, and removable. There’s a door to glue into place as well.

The roof needs a lot more painting, which it might get on Boxing Day or else in the New Year, but I’m fairly happy with the greyish tone of the walls at this point. I might wind up rebuilding the roof, as I got a bit too enthusiastic with the scissors and haven’t left much in the way of eves over the walls. The simplest fix for that might just be to slap another layer of towel down over the existing one.

This little building was mostly a test of the wood siding idea, and of building the hipped roofs so typical of rural buildings in early 20th C Russia (and elsewhere, of course). They’re fussier, but this one works and so does the woodwork, so the new year should see a nice little Russian hamlet taking shape here.

Hope everyone has an excellent holiday season, however you celebrate it, Merry Christmas, Happy New Year, and such!

RCW: Blundering Into Each Other

rcw_encounter
Early in the game, with most forces still on Blinds. Whites in the top corner, Reds in the foreground. Click through to Flickr for larger version.

We had another round of Mud & Blood powered Russian Civil War action this afternoon, with a White composite platoon under a very dynamic officer meeting a spread-out Red platoon on the outskirts of a South Russian village and defeating them fairly soundly.

Once again Stout Hearts & Iron Troopers was our starting point, this time Scenario Seven, A Baptism At Bleid, which is a German-vs-French encounter battle, with the French unit resting in a farmyard, more French off-table down the road, and the Germans coming on cautiously as everyone advances into Belgium in 1914. The scenario also has the whole table covered in thick mist, so spotting is considerably more difficult.

We swapped in White Russians for Germans and a Red Guard platoon for the French and went at it. Due to lack of painted figures we had about half the troop density the scenario calls for, but it was still a fun game and really showed the power of a high-Status Big Man in M&B. The Whites had the energetic Capt. Rumelski, Status IV, leading their composite platoon, plus Dynamic Leader (bonus Big Man moves) and Heroic Leader (one heroic act per game by a Big Man) cards in the deck. While the Whites had some initial trouble getting their platoon moving, once they got going they never stopped, and comprehensively shattered the Reds before the Red reinforcements could get onto the table to help out.

Reds scout down the road. Photo by Corey
Reds scout down the road. Photo by Corey

I was commanding the Reds, and really being too aggressive for the quality and quantity of troops I had available. I also launched one unsupported and unwise assault just because we hadn’t yet seen the M&B close combat rules in action yet. Now that we have, I won’t be doing that again… I badly damaged one White section, but utterly destroyed my largest rifle section doing so. Close combat in M&B is indeed decisive and bloody!

White Russian Cossacks. Photo by Corey
White Russian Cossacks. Photo by Corey

There’s still more Russians on my painting table, both Reds & Whites, and I’m looking forward to getting them into the game!

RCW Cards & Blinds In The Flesh

Finally got around to printing and cutting out a full set of the Russian Civil War Mud & Blood cards I created a few weeks ago, as well as the earlier Blinds.

Here’s the full set spread over my painting desk.

rcw_cards
They actually exist! Printed versions of the cards and blinds I’ve created for playing Russian Civil War games with Through The Mud & The Blood.

You can, of course, find the PDFs for the cards and the blinds in earlier posts here at The Warbard, so you can print your own.

Corey and I will be doing our second session of RCW M&B today (Sunday) at our regular games club meeting up at the local university. Game reports and possibly photos here, as usual.

Reds & Whites in the Mud & the Blood

The Russian Civil War figures I’ve been painting had their first outing Saturday evening, as Corey and I lined them up and tried out Through the Mud & the Blood out for the first time.

Whites at the wall
Whites at the wall, Reds in the field

The evening was only a partial success, but I have to say it wasn’t the fault of the rules, it was our fault as players! We’ve been playing .45 Adventure and other pulp rules the last couple of years, which are fairly low-lethality and overall fairly forgiving when it comes to morale, fully automatic weapons and that sort of thing. Mud & Blood is… not.

As mentioned in the previous post, we used Scenario One, “The Platoon Attacking a Strongpoint” as the basis for our game, with Reds attacking instead of British and Whites defending instead of Germans. Both games, the Reds got clobbered. I think the closest a Bolshevik trooper got to the White trench was about 14 inches or so, and that was for all of a couple minutes until the White Maxim HMG unjammed and blew the Reds away.

Let’s just say that under the M&B rules, a unit reduced to 5 troopers from 9 and carrying 12 Shock Points is not going to be useful for quite a while, if ever…

Whites man the wall
Whites man the wall

We actually played the same setup twice in one evening, switching sides for the second game. Two games in about four hours, with stoppages to reread the rules, rebeer the participants, mutually mull over tactical choices, swear at the dice and such is very respectable. The card-driven activation keeps things moving at a good clip, even when you’re brand new to the rules.

Basically, we spent the evening drinking beer and recapitulating, in 28mm, the mistakes and lessons of the first years of the Great War. Do not charge machine guns. For Dog’s sake, have something resembling a tactical plan. “Charge that emplacement!” is not, in fact, an actual viable tactical plan. Pitting ordinary riflemen against an entrenched machinegun is more than slightly unfair to the riflemen. Things like that.

We want to try it all again, with slightly different forces as I finish painting more Russians for both sides. Look for more mud and more blood here in the future!

First Mud & Blood Game This Evening

Quiet around here lately, primarily because all of my hobby time has been taken up painting White Russians for this evening’s first outing of Russian Civil War-flavoured Through the Mud & the Blood.

We’re using the first scenario from the TFL scenario book Stout Hearts & Iron Troopers, “The Platoon Attacking a Strongpoint”, with the defending Germans swapped out for Whites and the attacking British swapped for Reds. The British platoon in the scenario has all the Lewis guns, dedicated bombers and rifle grenades of a fully-evolved late WW1 Western Front British unit, all of which the Reds lack, so the Reds might get a fifth rifle section to make up the lack of specialized firepower.

Off to pack figures and head for the game, report here tomorrow, hopefully with photos if any of them turn out!